DAP Technologies 1-19
Getting Started
Connecting to AC Power
The M9020 operates either on external AC power or internal battery power. It is
recommended to use AC power when you start up the device for the first time.
CAUTION: Use only the AC adapter included with your M9020. Using other AC adapters may
damage M9020.
Perform the following to connect the M9020 to AC power:
1. Plug the DC cord of the AC adapter into the power connector of the
M9020.
2. Plug the female end of the AC power cord into the AC adapter.
3. Then plug the male end of the AC power cord into an electrical outlet.
1
2
3
When the AC adapter is connected, the battery pack is charging.
CAUTION:
• When you disconnect the AC adapter, disconnect from the electrical outlet first and
then from M9020. A reverse procedure may damage the AC adapter or M9020.
• When unplugging the connector, always hold the plug head. Never pull on the cord.
