DAP Technologies 1-21
Getting Started
Turning Off
To turn off the M9020, use the “
Shut Down
” command of your operating
system.
CAUTION: Wait for at least five seconds after turning off the M9020 before turning it back on.
When you finish a working session, you can stop the device by shutting it down
or by leaving it in Sleep or Hibernation mode:
To stop in
this mode...
Do this...
Off
Use the Windows Start Menu and follow the shut down
procedure.
You can force M9020 to turn off by pressing and holding the
power button ( ) for more than 6 seconds. This is not the
recommended method, but may be necessary if the system is
locked up.
Hybrid Sleep Short press the power button ( ) or use the Windows Start
Menu to put M9020 in Hybrid Sleep mode.
Hibernation
Use the Windows Start Menu to put M9020 in hibernation
mode.
Press the power button ( ) to resume or turn on the M9020 from any of these
modes.
See “Power Management” on page 4-6
for more information.
