www.daptech.com
CMU055-A2a
17
Getting Started
CHARGING THE BATTERY
From the Modular Charger
1 . Charging with Modular Charger requires one of
the following Modular Chargers for your area:
CSCE300-NA (North America - 110 V / 120 V
AC Adapter) or the CSCE300-EU (Europe 220
V) or the CSCE300-UK (United Kingdom 220 V) .
2 . Insert connector to unit .
3 . Connect the Modular Charger to the wall outlet .
Note: The CE8000B Battery Status indicator will turn
red in the next 5 seconds indicating that charging
is now in progress . The light will turn green when
charging is complete . Charging may take up to 5
hours .
Note: If the unit was turned off, it should turn back
on after a few seconds or after 2 to 3 minutes if the
main battery charge has been very low for some
time . Processing will resume exactly where it was
interrupted once re-charging starts .
Note: To preserve battery integrity, recharging must only take place when the battery is at a temperature
b5
°C (41°F) to + 45°C (113°F) . The battery status indicator glows yellow if the battery is too hot or
too cold to be charged and the charging system is disabled .
WArNING
Never recharge the unit with the battery removed . The unit may reset and can potentially corrupt any unsaved
data .
CSCE300-NA
CSCE300-EU
CSCE300-UK
Battery Status indicator on CE8640B
Battery Status indicator on CE8800B
Summary of Contents for CE8000BWE
Page 2: ......
