38
CMU055-A2a
www.daptech.com
BARCODE READERS
Laser Scanner
The ‘Laser Scanner’ function will depend on the
application used and a special software driver .
Refer to your application’s User Guide for further
instructions . Information included are basic
scanning instructions .
Refer to the diagram to the right for right and wrong
scanning methods .
Testing the Laser Scanner
1 . To test the Laser Scanner, click on:
a) Start
b) Program
c) DAP Utilities
d) CE Pad
2 . To activate scanner, point the top
(a)
of the
unit toward the barcode label needed to be
scanned .
3 . Press the ‘SCAN’ Key
(b)
and move
the unit back and forth so the
beam completely crosses the label .
4 . Once the label has been decoded, the unit will
sound a short ‘beep’ .
Note: If you keep the Scan key pressed for too
long, the unit will stop scanning by itself after a
few moments . The unit will sound two (2) beeps to
indicate that no barcode has been detected .
Advanced Users: Refer to the CE8000B Technical
Guide for further instructions on programming .
CAUTION
• Avoid Exposure to Laser Light Beam .
• Do not intentionally look into the Laser Light
Beam .
right
Wrong
CE8000B Options
a
b
Summary of Contents for CE8000BWE
Page 2: ......
