Dante DNA1991YM, Operation User'S Manual

Page: 105 / 172

71
5.2.11.2 Mobile Setting
Figure 4-54
Please refer to the following sheet for detailed information.
Parameter Function
Message Send In the event, after the corresponding message activation is
enabled, it will send message to the phone of receiver when
event happens. It needs to enable the function of message
activation function in the event interface when using the
function.
Message
Activation It can send message ON/OFF to the SIM card inside the device by
the mobile phone in the list, which is to enable /disable the dial-up
function and send REBOOT to restart the device.
Phone Activation User may use the mobile phone in the calling list to call the SIM
card inside the device to enable dial-up function.
5.2.12 WIFI
Note:
Some series devices don’t support WIFI and WPS function.
WPS function is supported by the devices with WPS button.
5.2.12.1 WIFI
WIFI info can show the name, status, IP information of the Current Hot Spot. Usually please “Refresh”
WIFI work information after reconnection to ensure the real-time display of the work status, because it
often takes some time to connect WIFI Hot Spot, which depends on the network signal strength.