Dante DLI1971, Installation And Operation Manual, Page: 21 / 28

6. 5 Zone setting
1 Use 95 preset or transfer 9 preset twice in three seconds to enter the
main menu
2
3
ZONES NUMBER
SET LEFT LIMIT
SET RIGHT LIMIT
CLEAR ZONE
EDIT ZONE LABEL
【
】
【 】
【 】
【 】 【 】
● 【 】
● 【 】
● 【 】
● 【 】
● 【 】
A dome may be set up to 8 zones; the regional scene can't be
overlapped . User will set label for each zone. When setting ZONE
LABEL as ON, the dome will display zone label as it runs some zone.
It is convenient to know the zone that the camera sh oots b y settin g zone
label.
Operate joystick, move the cursor to FUNCTION SETTING ,
press OPEN to enter submenu.
Operate joystick, move the cursor to ZONES , press OPEN to
enter submenu, as the left picture shows.
choose zone number as current zone,
there choices in the menu aim at current zone.
set current zone's left limit
set current zone's right limit
clear current zone setting
edit current zone label, as zone number
is 1. Zone label will auto-change as ZONE-1
Regard the left/right limit as the demarcation line, and set th e
middle part as a zone. Various operational ways are the same as other
settin gs in the menu. Therefore we won't exp lain it again.
、
、
、
Function setting
18
FUNCTION SETTING
PRESETS
SCAN
PATTERNS
TOUR
ZONES
BACK
EXIT
ZONES
EDIT ZONE LABEL
LABEL EAST
BACK
EXIT
：
ZONES NUMBER 1
SET LEFT LIMIT
SET RIGHT LIMIT
CLEAR ZONE
EDIT ZONE LABEL
BACK
EXIT
MAIN MENU
SYSTEM SETTING
COMM SETTING
FUNCTION SETTING
EXIT