Dante DLI1971, Installation And Operation Manual, Page: 17 / 28

6. 1 Preset setting
1
5
6
、
“ ”
、
、
、
、
、
Use 95 preset or transfer 9 preset twice in three seconds to enter the
main menu.
Define
【
】 【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
according to the order of the left picture, to click each
command to enter pr esetmenu , various functions as follow:
preset and display preset function can be set by keyboard
operation, input preset number at first, then click the key save reset/call
preset to carry out.
2 Define current preset number: mo ve the cursor to PRESET N
UMBER ,press OPEN to choose preset number, the range is 01-12 8,
as the left picture shows, here chooses number 5 as current preset, the
following operations aim at the current preset.
3 Define current preset: move the cursor to SET PRESET , press
OPEN , by operating joystick to adjust magnification, to choose good
objective image, press OPEN to save. If the image is very near, the
image is belong in digital zoom; when setting preset, the image will jump
to maximal optical zoom.
Preset function is that dome stores current pan/tilt angle,
zoom and other position parameters into the memory. When necessary
dome recalls these parameters and adjust camera to that position.
Display current preset: move the cursor to SHOW PRESET ,
press OPEN , the screen will display the current preset;
Clear current preset: move the cursor to CLEAR PRESET ,
press OPEN , the current preset is cleared.
Edit current preset label: move the cursor to EDIT PRESET LABEL ,
press OPEN to enter into editing preset submenu,
system au to-sets label as PRESET-XX, press OPEN to revise label.
“
”
Operation knacks
4
6. Function setting
Function setting
14
FUNCTION SETTING
PRESETS
SCAN
PATTERNS
TOUR
ZONES
BACK
EXIT
PRESETS
PRESET NUMBER 05
SET PRESET
SHOW PRESET
CLEAR PRESET
EDIT PRESET LABEL
BACK
EXIT
EDIT PRESET LABEL
LABEL PRESET-05
BACK
EXIT
：
MAIN MENU
SYSTEM SETTING
COMM SETTING
FUNCTION SETTING
EXIT
Noti ce:
1.When run ning to progra m, dis play, cl ear pre set and editlabel, sho uld ch oose
pr eset nu mber a t first.
2.Th e label may se t up to 16 cha racters, and do esn't n eed editing ch aracter s. Pres s
O pen contin uously to jump over a nd ues spaceb ar to re place t he dele ted cha racters .
W hen you finish to edit a char acter, p ress Open toent er into the nex t editin g
cha racter;when y ou fin ish to e dit the last cha racter, pressing Op en to save. P ress
C lose to exit.
Charac ter of l abel is suitabl e for ch oosing as follow: 0- 9 A-Z :<>- . , spac e.
、 、
【 】
【 】
【 】
【 】
●
●
●
●
●
PRES ET NU MBER selec t prese t numb er as cu rrent p reset
SET P RESET
SHOW PRES ET
CLEA R PRESET
EDIT PRESE T LAB EL
【 】
【 】
【 】
【 】
【 】