Dante DLI1971, Installation And Operation Manual, Page: 14 / 28

System setting
1 1
4. 5. 3 Park action
4. 5. 4
、 【 】 【 】
【 】
【 】 【 】
【 】 【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
NONE - (default)
PRESET -
SCAN -
PAT1 -
TOUR -
NONE -
AUTO -
PRESET -
SCAN -
PAT1 -
TOUR -
、
“ ”
、
“ ”
●
●
●
●
●
●
●
●
●
●
●
Power up action
This setting allows the dome to run an appointed action after it enters
vacancy for a few time (1-240minutes). If default sets as 0, it means
not to run this action.
1 Operate joystick, move the cursor to PARK TIME , press OPEN
to tilt up/down joystick to set park time, the range is 0-240 (minute),
press OPEN to save.
PARK A CTON is running action at park time, when PARK TIME
sets as 0, this item can't be set.
2 Operate joystick, move the cursor to PARK ACTON , press OPEN
there will be a sign in the front of PARK ACTON , the cursor jump
to right, after tilting up/down joystick to choose park action
there are options for choosing as follow, press OPEN to save.
none action
use preset 1
run scan
run pattern X
run tour
The dome stats to run actions after self-testing, if nobody intervenes
with it , the dome will repeatedly r un this action continuously , if default
sets as NONE .
1 Operate joystick, move the cursor to POWER UP ACTION : press
OPEN to jump to the following choice, tilt u p/down joystick to
choose power up action , press OPEN to save.
run scan
run pattern X
run tour
，
none action
the dome resumes the primary action and
direction before power up.
use preset 1
MOTION
AUTO FLIP ON
PROPORTION PAN ON
PARK TIME
005
PARK ACTION SCAN
POWER UP ACTION AUTO
FAN ENABLED
040
BACK
EXIT
MOTION
AUTO FLIP ON
PROPORTION PAN ON
PARK TIME
005
PARK ACTION SCAN
POWER UP ACTION AUTO
BACK
EXIT
FAN ENABLED 040
MOTION
AUTO FLIP ON
PROPORTION PAN ON
PARK TIME
005
PARK ACTION SCAN
POWER UP ACTION AUTO
BACK
EXIT
FAN ENABLED 040
4. 5. 5
【 】
【 】
【 】
O
O
C.
C.
Fan startup by temperature
The temperature of the dome will rise when its environment is in high
temperature. The fan will op en auto matically when the temperature reaches
to a temperature value in order to make sure the stability of the dome.
Operate joystick, move the cursor to FAN ENAB LED : press
OPEN , the cursor will skip to the back option. The user can press
OPEN to save it in actual condition.
The defau lt setting temperature of the fan startup is 40 The user
also can enter into the fan startup setting to adjust the temperature of fan
startup. As picture shows: the temperature range is 0-60