When the cursor is on "PTZ: CAM01 SPEED:01 DATA:01", the corresponding item will glitter. You could select
camera, set the speed and preset the data of image point. Select the item which need modify by pressing "SEQ" key
on the re mote cont rol or cl icking the item directly with the mouse, then change the numerical value by pressing "+/-"
key or digital key on the remote control or left/ right-click with the mouse.
Preset operation includes "set, view and delete".
(1) Select image point in the selected camera by "up, down, left, right" key, set a number for the image point in
"DATA", such as 01, then press " " key on the remote control or click icon, set is finished. ..
(2) To view the image point which has been preset, you could select the corresponding number in "DATA", then
press " " key on the remote control or click icon.
(3) To delete the image poin which has been preset, you could select the correspo ndin g numb er in "DATA", then
press "INFO" key on the remote control or click icon.
For other deta iled operations, please refer to Chapter 3: Panel operation, Remote control operation and Mouse operation.
Note: Only one channel can be selected at a time. The channel which is in PTZ control must be set the same
parameters as the ones of high speed dome in main menu "PTZ setup".
5.4
Motion detection
Note: 16-CH Non-Real Time DVR is not equipped with this function.
Step I Set motion alarm. Enter "Main menu-- motion setup" firstly.
Network Digital Video Recorder Operation Manual ( V3.0 )
37
