(2) Prerecord: on/off are optional. It is pre-recording for alarm record. It w ill begin to recor d about 3 seconds ahead
of move or alarm happening .
(3) Overwrite: whether the recorded videos in the hard disk are rew ritable. If it is ON, the pre vious recorded video
information will be replaced in turn when the hard disc is full. If not, it will pop up the prompt of "HDD full".
(4) Audio set: used to turn on or turn off the audio record.
(5) Quality: press or click "enter", you could see the following submenu;
(1) Camera: used to select the channel to be set.
(2) Quality: used to set the image quality of the to-be-recorded video.
(3) Frame rate: used to set the quantities of images that recorded in one second.
4.5
Schedule setup
Note: 16-CH Non-Real Time DVR is not equipped with this function.
Network Digital Video Recorder Operation Manual ( V3.0 )
28
