Dante DLA3800, Operation Manual

Page: 42 / 228

32
3333 Installation and Connections Installation and Connections Installation and Connections Installation and Connections
Note: All the installation and operations here should conform to your local
electric safety rules.
3.1
3.1 3.1
3.1 Check Unpacked DVR
Check Unpacked DVR Check Unpacked DVR
Check Unpacked DVR
When you receive the DVR from the forwarding agent, please check whether there is any visible
damage. The protective materials used for the package of the DVR can protect most accidental
clashes during transportation. Then you can open the box to check the accessories.
Please check the items in accordance with the list. Finally you can remove the protective film of
the DVR.
3.2
3.2 3.2
3.2 About Front P
About Front P About Front P
About Front Panel
anel anel
anel and Real Panel
and Real Panel and Real Panel
and Real Panel
The model label in the front panel is very important; please check according to your purchase
order.
The label in the rear panel is very important too. Usually we need you to represent the serial
number when we provide the service after sales.
3.3
3.3 3.3
3.3 HDD Installation
HDD Installation HDD Installation
HDD Installation
Before the installation, you can refer to the sheet to know the max HDD amount your product
supports.
Product Series Max HDD No.
1U
960H 1U 2
1.5U
960H 4HDD 1.5U 4
960H 2HDD 1.5U 2
2U
960H 8
You can refer to the Appendix for recommended HDD brand. Please use HDD of 7200rpm or
higher.
Please follow the instructions below to install hard disk.
All the figurers listed below are for reference only. Slight difference may be found on the
front or rear panel.
3.3.1 1U Series
The mini 1U series DVR has one SATA HDD and 1U series DVR has two SATA HDDs.
1. Loosen the screws of the
upper cover and side panel.
2. Fix four screws in the HDD
(Turn just three rounds).
3. Place the HDD in accordance with
the four holes in the bottom.