The DFG480XX Combo six-port modules are also available with 4@ MTRJ 100Mb mm SFF fiber and
2@10Mb fiber mm ST ports, and with 4@ RJ45 10/100 copper and 2@10Mb fiber mm ST ports.
The
4@ RJ-45 + 2@ 10 Mb ST
operation of the SFF fiber and the RJ-45 half of the module is as
described for those port types above. For detailed information about 10Mb mm ST fiber half of the
module, please check section 2.2.5.
2.2.7 Four-Port 10 Mb MM Fiber ST Modules
The 4 port @10Mb ST fiber modules behave the same as the 8@100Mb ST fiber modules except
for the 10Mb speed. For ports numbering, ports 1, 2, 5, 6 are present, ports 3, 4. 7, 8 are not
present. The default setup on the 10Mb fiber module is half-duplex, which allows the DFG48000
Switch to connect to any 10Mb hub or media converter or almost any other device with a 10Mb
fiber Ethernet port. User mode control per port through the MNS software is the same as the
other DFG480XX modules. The fiber ports support fiber cabling distances according to the
10BASE-FL standard, i.e., 2km distance for multi-mode fiber. (Single-mode for up to 10Km
distance may be available as a special order configuration).