5.2.2. DFG380XX 4@10/100Mbps RJ-45
and 2@100Mb multi-mode FX-SC
“snap-in” Fiber connector
The DFG480XX is also a Combo 6 Port module
equipped with 4 10/100Mb RJ-45 ports along
with 2 multimode 100Mbps fiber Optic transceivers
all in one module. It has LEDs indicating port
activity (ACT), Link (LK), and FDX / HDX
and 10/100 operation, and the same face-plate
lettering. While the functionality of these two modules
is essentially the same, the DFG480XX is equipped
with an SC-type "snap-in" instead of an ST-type.
5.2.3 DFG48044EYRC 4@ 10/100Mbps RJ-45 Ports
and 2@100Mbps single-mode FX-SC-type,
“snap-in” connector – 20Km
The
DFG48044EYRC
are Combo modules.
Equipped with 4 dual speed copper ports and 2 Singlemode
SC-type connectors. It provides an advantage through
combining copper and Fiber functions in one module of
the DFG48000 Switch supporting four Copper and two
single-mode fiber network segments. The DFG48044EYRC,
when installed in a DFG48000 Switch operates on
copper at the 100m distance. The Fiber is single-mode
and cable lengths can be as much as 20 Km each
port has an Activity (ACT) LED indicating packets being
received, a Link (LK) LED that indicates proper connectivity
with the remote device when lit and a FDX/HDX LED to
indicate full-duplex mode when lit (or half-duplex when off).
The 10/100 LED indicates 100Mbps speed when lit and
10Mbps speed when off.
5.2.4 DFG48044FYRC 4@ 10/100Mbps RJ-45 Ports
and 2@100Mbps single-mode FX-SC-type,
“snap-in” connector – 40Km
The
DFG48044FYRC
are a Combo module
equipped with 4 dual speed copper ports and 2
Single-mode (Long Reach) SC-type connectors.
It provides a combination of copper and Fiber
functions in one module to the DFG4800 Switches,
supporting four Copper and two single-mode (Long-
Reach) fiber network segments. The DFG48044FYRC,
when installed in a DFG48000 Switch has copper
supporting the 100m distance and Fiber supporting
single-mode fiber cable lengths of as much as 40+ Km.
Each port has an Activity (ACT) LED indicating packets
being received, a Link (LK) LED indicating proper
connectivity with the remote device when lit, and a
FDX/HDX LED indicating full-duplex mode when lit
(or half-duplex when off). The 10/100 LED indicates
the speed for the copper port, which is 100Mbps when
the LED is ON and 10 Mb when the LED is OFF.