Danfoss VLT HVAC Drive Metasys N2, Manual

Page: 32 / 36

Internal Floating Point (ADF), contin-
ued..
NPT NPA UNIT DESCRIPTION RANGE
PARAMETER
NUMBER
ADF 110 Sec Option B Relay 1 ON Delay 0.01 to 600.00 5-41:6
ADF 111 Sec Option B Relay 1 OFF Delay 0.01 to 600.00 5-42:6
ADF 112 Sec Option B Relay 2 ON Delay 0.01 to 600.00 5-41:7
ADF 113 Sec Option B Relay 2 OFF Delay 0.01 to 600.00 5-42:7
ADF 114 Sec Option B Relay 3 ON Delay 0.01 to 600.00 5-41:8
ADF 115 Sec Option B Relay 3 OFF Delay 0.01 to 600.00 5-42:8
ADF 120 V
Analogue Input X42/1 Low
Voltage
0.07 to 10.00 26-10
ADF 121 V
Analogue Input X42/1 High
Voltage
0.07 to 10.00 26-11
ADF 122 V
Analogue Input X42/3 Low
Voltage
0.07 to 10.00 26-20
ADF 123 V
Analogue Input X42/3 High
Voltage
0.07 to 10.00 26-21
ADF 124 V
Analogue Input X42/5 Low
Voltage
0.07 to 10.00 26-30
ADF 125 V
Analogue Input X42/6 High
Voltage
0.07 to 10.00 26-31
ADF 130 %
Analogue output X42/7
Timeout preset
0.00 to 100.00 26-53
ADF 131 %
Analogue output X42/9
Timeout preset
0.00 to 100.00 26-64
ADF 132 %
Analogue output X42/11
Timeout preset
0.00 to 100.00 26-74
ADF 140
ECB Bypass Start timer de-
lay
0-60 31-01
ADF 141 ECB Drive Trip Bypass delay 0-300 31-02
1 "Feedback" if closed loop - and "100 Hz" if open loop
2
Unit is power dependent
3
The drive must be stopped to change this point
4
The point is global in all 4 setups
5 Not availabele in all units.
3. Appendix VLT ® HVAC Drive Metasys N2
32
MG.11.G1.02 - VLT ® is a registered Danfoss trademark
3