•
•
•
•
•
•
•
•
•
•
•
•
•
Table 12: Setup Wizard for Closed-loop Applications
Parameter
Option/range
Default
Usage
Parameter 0-03
Regional Set-
tings
[0] International
[1] US
[0] Interna-
tional
–
Parameter 0-06
GridType
[0] 200–240 V/50 Hz/IT-grid
[1] 200–240 V/50 Hz/Delta
[2] 200–240 V/50 Hz
[10] 380–440 V/50 Hz/IT-grid
[11] 380–440 V/50 Hz/Delta
[12] 380–440 V/50 Hz
[20] 440–480 V/50 Hz/IT-grid
[21] 440–480 V/50 Hz/Delta
[22] 440–480 V/50 Hz
[30] 525–600 V/50 Hz/IT-grid
[31] 525–600 V/50 Hz/Delta
[32] 525–600 V/50 Hz
[100] 200–240 V/60 Hz/IT-grid
[101] 200–240 V/60 Hz/Delta
[102] 200–240 V/60 Hz
[110] 380–440 V/60 Hz/IT-grid
[111] 380–440 V/60 Hz/Delta
[112] 380–440 V/60 Hz
[120] 440–480 V/60 Hz/IT-grid
[121] 440–480 V/60 Hz/Delta
[122] 440–480 V/60 Hz
[130] 525–600 V/60 Hz/IT-grid
[131] 525–600 V/60 Hz/Delta
[132] 525–600 V/60 Hz
Size selected
Select the operating mode for restart after reconnection of
the drive to mains voltage after power down.
Parameter 1-00
Configuration
Mode
[0] Open loop
[3] Closed loop
[0] Open loop
Select
[3] Closed loop
.
Parameter 1-10
Motor Con-
struction
*[0] Asynchron
[1] PM, non-salient SPM
[3] PM, salient IPM
[0] Asynchron
Setting the parameter value might change these parame-
ters:
Parameter 1-01 Motor Control Principle
.
Parameter 1-03 Torque Characteristics
.
Parameter 1-08 Motor Control Bandwidth
.
Parameter 1-14 Damping Gain
.
Parameter 1-15 Low Speed Filter Time Const
.
Parameter 1-16 High Speed Filter Time Const
.
Parameter 1-17 Voltage Filter Time Const
.
Parameter 1-20 Motor Power
.
Parameter 1-22 Motor Voltage
.
Parameter 1-23 Motor Frequency
.
Parameter 1-24 Motor Current
.
Parameter 1-25 Motor Nominal Speed
.
Parameter 1-26 Motor Cont. Rated Torque.
AQ367426199594en-000101 / 130R0988
32 | Danfoss A/S © 2021.06
Programming
VLT® HVAC Drive FC 131
Operating Guide
