VLT® 5000 Crane
Operating variable:
Unit:
Reference
[%]
Reference
[unit]
Feedback
[unit]
Frequency
[Hz]
Speed RPM
[rpm]
Current
[A]
Torque
[%]
Power
[kW]
Power
[HP]
Output energy
[kWh]
Motor voltage
[V]
DC-link voltage
[V]
Motor ETR value
[%]
Inverter ETR value
[%]
Hours run
[Hours]
Digital input
[Bin]
Input status, analogue terminal 53
[V]
Input status, analogue terminal 58
[mA]
Input status, analogue terminal 60
[mA]
External reference
[%]
Status word
[Hex]
Brake energy/2 min.
[kW]
Brake energy/sec.
[kW]
Heat sink temp.
[ºC]
Alarm word
[Hex]
Control word
[Hex]
Warning word 1
[Hex]
Extended status word
[Hex]
Operating variables 1.1, 1.2 and 1.3 in the first line,
and operating variable 2 in the second line are selected
via parameter 009, 010, 011 and 012.
•
Read-out state I:
This read-out state is standard after starting
up or after initialisation.
50.0 Hz
FREQUENCY
MOTOR IS RUNNING
Line 2 gives the data value of an operating variable with
related unit, and line 1 provides a text which explains
line 2, cf. table. In the example, Frequency has
been selected as variable via parameter 009. During
normal operation another variable can immediately
be read out by using the [+/-] keys.
•
Read-out state II:
Switching between read-out states I and II is effected
by pressing the [DISPLAY / STATUS] key.
MOTOR IS RUNNING
50.0 Hz
24.3% 30.2% 13.8A
In this state, data values for four operating values
are shown at the same time, giving the related
unit, cf. table. In the example, Reference, Torque,
Current and Frequency are selected as variables
in the first and second line.
•
Read-out state III:
This read-out state can be held as long as the
[DISPLAY/STATUS] key is pressed. When the
key is released, the system switches back to
Read-out state II, unless the key is pressed for
less that approx. 1 sec., in which case the system
always reverts to Read-out state I.
50.0 Hz
SETUP
1
MOTOR IS RUNNING
REF% TORQUE CURR A
This is where parameter names and units for operating
variables in the first and second line are given -
operating variable 2 remains unchanged.
✭
= factory setting. () = display text [] = value for use in communication via serial communication port
MG.50.N4.02 - VLT is a registered Danfoss trademark
38
