7. If previously removed, install orifices (T70/T80) using a 3 mm internal hex wrench. Torque to 2.5 N·m
[1.8 lbf·ft].
8. Install the control module and six cap screws (M90).
9. Using a 5 mm internal hex wrench, torque the cap screws (M90) to 13.5 N•m [10 lbf•ft].
Control module removal/installation
M025
M1
M02
M02
5 mm
13.5 N•m
[10 lbf•ft]
M90
M050 (3X)
M050 (3X)
D084
5 N•m [4 lbf•ft]
4 mm
5 N•m
[4 lbf•ft]
4 mm
2.5 N•m
[1.8 lbf•ft]
3 mm
M
Torque sequence
2
3
4
5
6
1
Service Manual
Series T90 Axial Piston Pumps
Minor repair
66 |
©
Danfoss | March 2020
AX216086485386en-000101