10 | © Danfoss | Energy Meters | 2018.01 VUIGB802
Installation & User Guide
SonoSelect and SonoSafe
2.7 Installation of module/cable
1.
Before handling module PCB ensure relevant ESD regulations are
observed (IEC 61340-5-1).
2.
Break wired seal for enclosure.
3.
Cut rubber parallel to enclosure.
4.
Insert module following guide on PCBA cover.
Insert cable through hole, connect cable and fix to screw terminals
matching color and terminal numbers.
Fix cable(s) to cable relief. Outer jacket no longer than 9 mm from cable
relief (line). Press down.
5.
Close enclosure making sure that no cables interfere with rubber
sealing and other internal parts.
Click!
6.
Reset tamper alarm via Sono-App for SonoSelect 10.
For module configuration, see SonoApp user guide.