Danfoss Heating
5
GB
1.0 What is Z Wave?
The RZ1 unit has two operating modes;
PROGRAMME Mode:
used to configure and set-up the RZ1 by the
installer.
NORMAL OPERATION Mode
: should be set in this mode to allow the
RZ1 to work correctly, once installed into system.
The RZ1 can act as a Z-Wave network primary, or secondary controller
within a network.
Z wave is an ideal solution for installations of all kinds where a
wired heating solution is undesirable or not possible. Using 2 way
communication each component of the system can ‘talk’ to each
other creating a network of Z-Wave enabled devices. In a domestic
heating system this can consist of as little as a wireless thermostat
and a wireless receiver up to an entire home controlled using
Z-Wave technology. Everything from lighting, burglar alarms, home
entertainment systems and many more can be controlled using
Z-Wave.
Look for the Z-Wave logo on products to ensure compatibility with
other Z-Wave devices.
2.0 Operating Modes
