GB
RZ1 AND RZ1-HP
10
Binding
The act of linking a remote wireless unit (i.e.
thermostat or time controller) to the RZ1
receiver channel
Channel
The output of the RZ1 unit. RZ1 has one
channel. This channels can be used to control
a device that requires switching on.
Include/Exclude
Initiator Button
On every Z-Wave product there will be a
button or process to tell the device to send
out a request to join or leave an existing or
new network.
LED
Light Emitting Diode. The RZ1 has tri-colour
LEDs to indicate the different states the
control can be in.
Programme State
The RZ1 is ready to include or exclude other
Z-Wave compatible devices from the network.
Ready State
When the RZ1 is in ready state the GREEN
PROG LED is lit and the device is waiting for
instructions to switch on or off its output(s).
Reset State
In the Reset State the RZ1 is reset back to
factory defaults and is ready to either be
added into an existing network as a secondary
controller or to be used to create a network as
a primary controller.
Z-Wave
A wireless communication protocol designed
for low-power and low-bandwidth appliances,
such as home automation and sensor
networks
8.0 Glossary
GB
