manualshive.com logo in svg

Danfoss PVG 100, Technical Information

Share
Download
Danfoss PVG 100 Technical Information Download Page 38

Standard mounting vs. option mounting

Standard mounting – the PVM on the “A” port side of the PVB

B

A

Standard Mounted Work Section

LS holes

P301 065

Standard mounting is defined as installing the PVM on the “A” port side of the PVB. Because of this, the
PVE or PV cover (PVH, PVMD, PVMR, PVMF or PVHC) would be on the “B” port side of the valve.

Option mounting – the PVM on the “B” port side of the PVB

B

A

LS holes

P301 066

Option mounting is defined as installing the PVM on the “B” port side of the PVB. Because of this, the PVE
or PV cover (PVH, PVMD, PVMR, PVMF or PVHC) would be on the “A” port side of the valve.

The PVBS in PVG 100 are not symmetric. Because of this the “Load Sense” (Ls) holes in the PVBS main
spool must be installed so that they are on the “B” port side of the PVB.

Standard mounting spool (upper PVBS) vs. Option mounting spool (below PVBS)

LS holes

Before determining spool part numbers, determine whether the section will be standard or option
mounted. Standard and Option mounting only applies to a work section. Standard and option mounted
section can be used together in the same stack.

Technical Information

PVG 100 Proportional Valve Group

Mounting

 

38 | 

©

 Danfoss | May 2018

520L0720 | BC00000039en-US0502

Summary of Contents for PVG 100













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands