Danfoss PVG 100, Technical Information

Page: 25 / 76

PVG 100 technical data
The technical data for PVG 100 are typical measured results. For the hydraulic system a mineral based
hydraulic oil with a viscosity of 21 mm
2
/s [102 SUS] and a temperature of 50 °C [122 °F] was used.
PVG 100 technical data
Max. pressure Port P continuous 350 bar [5075 psi]
Port P intermittent
1)
400 bar [5800 psi]
Port A/B
2)
350 bar [5075 psi]
Port T, static / dynamic 25 bar/40 bar [365/580 psi]
Port T0, static / dynamic 5 bar/10 bar [75/145 psi]
Oil flow, rated
(See characteristics) Port P (PVPV / PVPVM) 250/400 l/min [66/106 US gal/min]
Port A/B, with press. comp.
@15 bar [217psi]
3)
180 l/min
240 l/min [47.6 US gal/min]
[63.4 US gal/min]
Spool travel, standard ± 7 mm [±0.28 in]
Spool travel, float
position spool P
→ A → F
Proportional range A: 5.5 mm
B: 7.0 mm A: [±0.22 in]
B: [±0.28 in]
Float position 8 mm [±0.32 in]
Dead band,
flow control spools Standard ± 1.5 mm [±0.06 in]
Max. spool leakage
at 100 bar [1450 psi] and
21 mm
2
/s [102 SUS]
A/B → T, without shock valve
3)
20/30 cm
3
/min [1.22/1.85 in
3
/min]
A/B
→
T, with shock valve
3)
25/35 cm
3
/min [1.53/2.14 in
3
/min]
Max. internal leakage with pilot operated check
valve at 200 bar [2900 psi] and
21 mm
2
/s [102 SUS]
A/B
→
T, without shock valve 1 cm
3
/min [0.06 in
3
/min]
A/B
→
T, with shock valve 6 cm
3
/min [0.37 in
3
/min]
Oil temperature
(inlet temperature) Recommended temperature 30
→
60°C [86
→
140°F]
Min. temperature -30°C [–22°F]
Max. temperature +90°C [194°F]
Oil viscosity Operating range 12 - 75 mm
2
/s [65 - 347 SUS]
Min. viscosity 4 mm
2
/s [39 SUS]
Max. viscosity 460 mm
2
/s [2128 SUS]
Ambient temperature -30
→
+60°C [–22
→
+140°F]
Filtration / Max. contamination (ISO 4406) 23/19/16
1)
Intermittent operation: the permissible values may occur for max. 10% of every minute.
2)
PVG 100-HF - 350 bar [5075 psi] rated for 250 000 cycles, max. continuous pressure 320 bar [4640 psi].
3)
PVG 100-HF - High Flow option work section.
PVH, hydraulic actuation
PVH, Hydraulic Actuation
PVH data Pressure, bar [psi]
Control range 5 to 15 [75 to 220]
Maximum pilot pressure, static 30 [435]
Maximum pressure on port T
(It is recommended that the tank connection from the hydraulic remote control unit
PVRH is taken directly to tank.)
10 [145]
Technical Information
PVG 100 Proportional Valve Group
Technical data
© Danfoss | May 2018 520L0720 | BC00000039en-US0502 | 25