Instruction
Pump instruction PAHT C 2-6.3
37
180R9316 | AQ176586503002en-000501 | IOM PAHT C 2-6.3 pumps | 01.2022
PAHT C 2-6.3
P
T
C
Thread size
G 1⁄4 x 11
G 1⁄2 x 15
M6; Allen key 4 mm
Max tighten
torque
25 Nm
25 Nm
5 Nm
3.5 Connections
Recommended torque values refer to steel washers containing a rubber sealing element .
3.4 Protection from too high pressure
The pump should be protected against too high
pressure by means of a pressure relief valve or a
bypass/unloading valve placed on the pressure
side .
The valve should be placed as close to the pump
as possible .
The opening characteristics of the valve must not
result in peak pressures higher than 200 bar
(2900 psi) .
The valve outlet must not be connected directly
to the pump suction line . It shall be connected
directly to the tank .
P: Pressure
T: Tank
C: Bleeding
D: Parallel key
5 x 5 x 20,
DIN 6885
Summary of Contents for PAHT C
Page 30: ...Danfoss DCS im 2017 06 521B1374 A 234386502982en000401 PAHT C pumps UK 06 2017 30...
Page 46: ...46 180R9316 AQ176586503002en 000501 IOM PAHT C 2 6 3 pumps 01 2022...
Page 75: ...180R9316 AQ176586503002en 000501 IOM PAHT C 2 6 3 pumps 75 Danfoss DCS im 2022 01...
Page 76: ...Danfoss DCS im 2022 01 76 180R9316 AQ176586503002en 000501 IOM PAHT C 2 6 3 pumps...