Assembling OSPE (continued)
Place springs with trust pads (62) over the two balls.
Place O-rings (40) on adjusting screws (64). Screw in the
two adjusting screws (64) using a 5 mm
Hex key.
After entire assembly of the steering valve, make the
pressure setting on a test panel according to valve
setting specification, see
Shock valves
on page 44.
Insert the EH-spool (202).
Place O-ring (310) on plug (205). Screw in the plug (205)
using a 32 mm
socket spanner.
45 ±5 Nm
Service Manual
OSPE Steering Valve
Assembly
L1506577 • Rev 0001 • August 2015
37
