Assembling OSPE (continued)
The OSPE can now be function tested manually: it must
be possible to rotate input shaft with torque < 3.5 Nm [31
lbf•in].
Place the dust seal ring (9) in the housing.
Fit the dust seal ring (9) in the housing using special tool
for dust seal assembly (see page 7) and a plastic
hammer.
Place O-ring (41) on the shock valve seats (63). Screw in
the seats (63) using a 2.75 mm
Hex key into the
cavities indicated by the circles.
6 ± 1 Nm. [53.1 ±
8.85 lbf•in].
Place one ball (61) in each of the shock valve cavities.
Service Manual
OSPE Steering Valve
Assembly
36
L1506577 • Rev 0001 • August 2015
