Operating guide | iSave 50 - 70
5
180R9357 | AQ265943679828en-00100
2
IOM iSave 50 - 70 | 0
3
.202
3
2.
Introduction
2.1 General
iSave is manufactured by Danfoss A/S, and is sold
and marketed by a net of authorised distributors
world wide.
This manual contains the necessary instructions
for the installation, operation and service of the
iSave.
All personnel who are responsible for the
operation and maintenance of the iSave unit
must read and fully understand these
instructions, especially the section “Safety”
before:
•
Transporting of the iSave unit.
•
Lifting the unit.
•
Installing the iSave unit on a frame.
•
Connecting the iSave unit to the fluid
system.
•
Connecting the electrical motor and
instrumentation.
•
Commissioning the unit.
•
Servicing the iSave unit, mechanics and
electrics.
•
Decommissioning the iSave unit.
Ensure that these instructions are always readily
available to all personnel concerned.
2.2 Target group
This manual is intended for use by personnel
with qualified training and experience in the
operation and maintenance of a Sea Water
Reverse Osmosis (SWRO) or Brackish Water
Reverse Osmosis (BWRO) system.
2.3 Symbols
Indicates something to be noted by
the reader.
Indicates a situation which will or
couldresult in damage to the iSave
and its function.
Indicates a situation which will or
could result in personal injury and/or
damage to the iSave.
Electrical hazard. Indicates a high-voltage
warning
Safety glasses required
Hearing protection required
Safety shoes required
Safety helmet required
2.4 Manufacturer and customer service
Danfoss A/S
High Pressure Pumps
DK-6430 Nordborg, Dinamarca
Tel.: +45 7488 2222
E-mail: [email protected]
Homepage: hpp.danfoss.com
2.6 Additional technical documents
Document name
Content
Service guide: 180R9387
Disassembling and assembling
Description of how to disassemble and assem-
ble the iSave
Design guide: 180R9367
Pipe connection
Design guide on how to make har piping
with Victaulic clamps
Guide line: 180R9371
Pressure safety valve in SWRO systems
Guide line on how to evaluate if a safty
valve is needed in a SWRO system
Guide line: 180R9370
Review sheet P&ID
Detailed description about the need for
each individual component in the preferred
P&ID
Below documents are not present in this Operating guide. Please contact Danfoss.
2.5 Country specific information
2.5.1 United Kingdom
Danfoss Ltd.
22 Wycombe End
HP9 1NB Beaconsfield
United Kingdom
If the recommendations in the manual are
not followed, Danfoss reserves the right to
void the warranty.
Summary of Contents for iSave 50
