HLP-V Series
7
Contorl card, analog inputs:
No. of programmable analog voltage inputs/thermistor inputs
2
Terminal no.
53, 54
Voltage level
0 -
±
10 V DC (scalable)
Input resistance, Ri 10
k
No. of programmable analog current inputs
1
Terminal no.
60
Current range
0/4 -
±
20 mA (scalable)
Input resistance, Ri
200
Resolution
10 bit + sign
Accuracy on input
Max. error 1% of full scale
Scanning time per input
3 msec.
Terminal no. ground 5
5
Reliable galvanic isolation: All analog inputs are galvanically isolated from the supply voltage (PELV)* as well
as other inputs and outputs.
Control card, pulse/encoder input:
No. of programmable pulse/encoder inputs
4
Terminal no.
17, 29, 32, 33
Max. frequency on terminal 17
5 kHz
Max. frequency on terminals 29, 32, 33
20 kHz (PNP open collector)
Max. frequency on terminals 29, 32, 33
65 kHz (Push-Pull)
Voltage level
0-24 V DC (PNP positive logics)
Voltage level, logical
‘
0
’
< 5 V DC
Voltage level, logical
‘
1
’
>10 V DC
Maximum voltage on input
28 V DC
Input resistance, Ri
2 k
Scanning time per input
3 msec.
Resolution
10 bit + sign
Accuracy (100-1 kHz), terminals 17, 29, 33
Max. error: 0.5% of full scale
Accuracy (1-5 kHz), terminal 17
Max. error: 0.1% of full scale
Accuracy (1-65 kHz), terminals 29, 33
Max. error: 0.1% of full scale
Reliable galvanic isolation: All pulse/encoder inputs are galvanically isolated from the supply voltage (PELV)
*. In addition, pulse and encoder inputs can be isolated from the other terminals on the control card by con-
necting an external 24 V DC supply and opening switch 4.
Control card, digital/pulse and analog outputs:
No. of programmable digital and analog outputs
2
Terminal no.
42, 45
Voltage level at digital/pulse output
0 - 24 V DC
Minimum load to ground (terminal 39) at digital/pulse output
600
Frequency ranges (digital output used as pulse output)
0-32 kHz
Current range at analog output
0/4 - 20 mA
T
e
c
hn
ic
a
l
da
ta
Summary of Contents for Holip HLP-V Series
Page 1: ......