Auxilliary pads
SAE B
SAE A
K400
8 mm
E101 533E
Pressure Limiter Removal
1. Using a 14 mm wrench, remove pressure limiter cartridges (L300) and (L400).
Pressure limiter (L300 / L400) is available as complete unit only. Seal (L022) is available separately.
2. Remove and discard O-ring (L022).
Right and left pressure settings are different. Tag each valve for later re-assembly
Remove pressure limiter
E101 415E
14 mm
L300 / L400
L022
Charge Pressure Relief Valve Removal
Using a 22 mm wrench, remove the charge pressure relief valve (V10). Discard O-ring (V024).
Charge pressure relief valve (V10) is available as complete unit only. Seal (V024) is available
separately.
Repair Instructions
H1 45/53/60/68 Closed Circuit Axial Piston Pumps
Disassembly
520L0957 • Rev CB • September 2014
13
