![background image](http://html1.mh-extra.com/html/danfoss/et4350/et4350_operators-manual_507930016.webp)
2.4.2 Protection equipment
Due to the variety of customer-specific workpieces, UNIFLEX is not
capable of supplying additional standard protection equipment to-
gether with the machine for the prevention of potential residual risks
imposed by the machine.
The necessity of additional, workpiece-specific protection equipment
may for instance arise for angled workpiece geometries needing a
large opening for being inserted into the forming machine. The pres-
sure joining of insulators, structural steel and steel ropes, too, may re-
quire special safeguards.
The owner has to consider the need for adapted protection equip-
ment before commissioning. If such need exists, the relevant protec-
tion equipment has to be mounted before commissioning of the ma-
chine.
UNIFLEX will provide you with customized solutions for protection
equipment upon request. Please do not hesitate to address your per-
sonal contact for consultation.
Mounted safety equipment must not be removed, bypassed or
avoided.
2.4.3 Warning signs on the machine
Summary of Contents for ET4350
