Danfoss ET4300, Operator'S Manual

Page: 16 / 74

2.4.2 Emergency-Stop
The machine is fitted with an emergency-stop switch on the control
panel.
Immediately activate the emergency-stop switch (1) in cases of
emergency.
Remedy the cause of the emergency stop first before re-starting the
machine.
2.4.3 Protection equipment
Due to the variety of customer-specific workpieces, UNIFLEX is not
capable of supplying additional standard protection equipment to-
gether with the machine for the prevention of potential residual risks
imposed by the machine.
The necessity of additional, workpiece-specific protection equipment
may for instance arise for angled workpiece geometries needing a
large opening for being inserted into the forming machine. The pres-
sure joining of insulators, structural steel and steel ropes, too, may re-
quire special safeguards.