Danfoss ERC 214, Installation Manual, Page: 9 / 152

| 9 DKRCE.PI.RL0.H7.ML Installation Guide | ERC 214
5 - Quick Configuration via “ cFg ” Menu
y
Press SET for three seconds to access the parameters groups.
y Select “ CFg ” menu and press SET to enter. The first menu “ r12 ” (main switch) is displayed.
y
Switch OFF main switch (r12=0) for changing the pre-installed application.
y Press UP/DOWN to scroll through the parameter list.
y Configure the “ o61 ” parameter to select a pre-installed application:
- Press SET to access the “
o61
” parameter.
- Press UP/DOWN to select an application (AP0= no application selected).
- Press SET to confirm, “
o61
” is displayed.
y Continue to set the next parameters (“ o06 ” sensor type and “ o36 ” DO4 configuration) in the “ cFg ” menu.
ENGLISH