Danfoss ERC 213, Installation Manual, Page: 8 / 9

DKRCE.PI.RL0.O2.02 / 520H11062 | 8 © Copyright Danfoss | Published by AZ | 2016.04 Installation guide | ERC 213
Installation guide - ERC 213
Parameter Name - ERC 213 Code Min Max Unit
App. 0
(Def.)
App. 1 App. 2 App. 3 App. 4 App. 5 App. 6
Relay 2 counter
(1 count=100 cycles of operation)
o24 0 999 0 0 0 0 0 0 -
Relay 3 counter
(1 count=100 cycles of operation)
o25 0 999 0 0 0 0 0 0 -
DI2 configuration
oFF=not used, Sdc=status display
output, doo=door alarm with
resumption, doA=door alarm without
resumption, SCH=main switch,
nig=day / night mode, rFd=reference
displacement, EAL=external alarm,
dEF=defrost, Pud=pull-down
o37 oFF Pud oFF oFF oFF oFF oFF oFF oFF
Predefined applications o61 AP0 AP6 AP0 AP1 AP2 AP3 AP4 AP5 -
Save settings as factory
WARNING: the earlier factory settings
are overwritten o67 no yES no no no no no no -
DO2 config
dEF=defrost, ALA=alarm
o71 dEF ALA dEF ALA dEF dEF dEF dEF dEF
Display at defrost
Air=actual air temperature,
FrE=freezed temperature,
-d-="-d-" is displayed
o91 Air -d- -d- -d- -d- -d- -d- -d-
-d-
Polarity P--
DI1 input polarity
nc=normally closed,
no=normally open
P73 nc no no no no no no no no
DI2 input polarity
nc=normally closed,
no=normally open P74 nc no no no no no no no no
Invert alarm relay
0=normal, 1=invert relay action
P75 0 1 0 0 - - - - -
Keyboard lock enable P76 no yES no no no no no no -
N.B.: hidden parameters are greyed out