Danfoss ERC 213, Installation Manual, Page: 7 / 9

DKRCE.PI.RL0.O2.02 / 520H11062 | 7 © Copyright Danfoss | Published by AZ | 2016.04 Installation guide | ERC 213
Installation guide - ERC 213
Parameter Name - ERC 213 Code Min Max Unit
App. 0
(Def.)
App. 1 App. 2 App. 3 App. 4 App. 5 App. 6
Max defrost time d04 0 480 min 30 45 15 15 30 30 30
Defrost delay at power up
(or DI signal)
d05 0 240.0 min 0 0 0 0 0 0 -
Drip delay d06 0 60 min 0 0 0 0 0 0 5
Fan delay after defrost d07 0 60 min 0 0 0 0 0 0 5
Fan start temperature
after defrost
d08 -50.0 0.0 C/F -5.0 - - - -5.0 -5.0 -
Fan during defrost d09 oFF on on on on on on on on
Defrost stop sensor
configuration
non=time,
Air=Sair (air temperature),
dEF=S5 (defrost sensor) d10 non dEF non non non non dEF dEF non
Compressor accumulated
runtime to start defrost,
0=OFF
d18 0 96 hours 0 0 0 0 0 0 -
Defrost on demand
20.0=OFF
d19 0.0 20.0 K 20.0 - - - 20.0 20.0 -
Defrost delay after pull-down
0=OFF
d30 0 960 min 0 0 0 0 0 0 -
Fan control F--
Fan at compressor cutout
FFc=fan follow compressor,
FAo=fan always ON,
FPL= fan pulsating
F01 FFc FPL FAo FAo FAo FAo FAo FAo FAo
Fan stop evaporator temperature
50.0=OFF
F04 -50.0 50.0 C/F 50.0
- - -
50.0 50.0 -
Fan ON cycle F07 0 15 min 2 2 2 2 2 2 2
Fan OFF cycle F08 0 15.0 min 2 2 2 2 2 2 2
Compressor c--
Compressor minimum ON time
C01 0 30 min 0 0 0 0 0 0 0
Compressor minimum OFF time C02 0 30 min 2 2 2 2 2 2 2
Compressor OFF delay
at door open
C04 0 15 min 0 0 0 0 0 0 1
Zero crossing selection C70 no yES yES yES yES yES yES yES yES
Others o--
Delay of outputs
at startup
o01 0 600 min 5 5 5 5 5 5 5
DI1 configuration
oFF=not used, Sdc=status display
output, doo=door alarm with
resumption, doA=door alarm without
resumption, SCH=main switch,
nig=day / night mode, rFd=reference
displacement, EAL=external alarm,
dEF=defrost, Pud=pull-down,
Sc=condenser sensor
o02 oFF Sc oFF oFF oFF oFF oFF oFF oFF
Serial address o03 0 247 0 0 0 0 0 0 -
Password o05 no 999 no no no no no no no
Sensor type selection
n5=NTC 5 K, n10=NTC 10 K,
Ptc=PTC, Pt1=Pt1000 o06 n5 Pt1 n10 n10 n10 n10 n10 n10 -
Display resolution
0.1=steps of 0.1 °C,
0.5=steps of 0.5 °C,
1.0=steps of 1.0 °C
o15 0.1 1.0 0.1 0.1 0.1 0.1 0.1 0.1 0.1
Relay 1 counter
(1 count=100 cycles of operation)
o23 0 999 0 0 0 0 0 0 -
N.B.: hidden parameters are greyed out