Danfoss ERC 213, Installation Manual, Page: 3 / 9

DKRCE.PI.RL0.O2.02 / 520H11062 | 3 © Copyright Danfoss | Published by AZ | 2016.04 Installation guide | ERC 213
Installation guide - ERC 213
Danf
oss
80G137.01
SET
SET
4 - Menu structure
SET: press for 3 seconds for state, settings and service
1) Parameters group
2) Parameter names
3) Value
Password (if enabled)
Input states
Main switch
Application
1-2-3-4-5-6
Application
6-5-4-3-2-1
Application 0
Application
Sensor type
Configuration
To scroll the
parameter groups
To scroll the
parameter names
5 - Quick configuration with “cFg” menu
• Press SET for three seconds to open the parameter groups.
• Select the “
cFg ” menu and press SET to open. The first menu “ r12 ” (main switch) is displayed.
• Set the main switch to OFF (r12=0) to change the preinstalled application.
• Press UP/DOWN to scroll through the parameters list.
• Configure the parameter “
o61 ” to select a preinstalled application:
- Press SET to open the parameter “ o61 ”.
- Press UP/DOWN to select an application (AP0= no application).
- Press SET to confirm; “
o61 ” is displayed.
• Continue to set the following parameters (sensor type “ o06 ”) in the “ cFg ” menu.