Installation Instruction
Danfoss Self-limiting Heating Cables
088L8008 / VIAMQ502
14 | © Danfoss | FEC | 2019.02
1. Valve
2.
Heating cable
3.
Aluminium tape
4. Pipe
5.
Pipe fitting
Installation Summary
Straight cables must be fitted as shown at 5 or 7
o’clock. Inpipe cables are fitted directly in the pipe with
compression gland. Cables wrapped around pipes are
attached as shown for every 20-30 cm of pipe with
aluminium tape (for large pipe diameters only).
Extend cold leads/terminate cables, and place con-
nections in a dry place. Mount connection box on or
close to pipe, and install thermostat next to pipe.
4.2
Installation in pipes
In-pipe Frost Protection
1. Insulation.
2.
Heating cable.
3.
Sensor (optional - not shown).
4. Fitting.
Summary of Contents for ECpipeguard 10
Page 2: ......
