3.0 Daily use
3.1 How to navigate
You navigate in the controller by turning the dial left or right to
the desired position (
).
The dial has a built-in accellerator. The faster you turn the dial, the
faster it reaches the limits of any wide setting range.
The position indicator in the display ( ) will always show you where
you are.
Push the dial to confirm your choices ( ).
The display examples are from a two-circuit application: One
heating circuit ( ) and one domestic hot-water (DHW) circuit ( ).
The examples might differ from your application.
Example shows ECL 210 / 310
Heating circuit ( ):
DHW circuit ( );
Some general settings which apply to the entire controller are
located in a specific part of the controller.
To enter ‘Common controller settings’:
Action:
Purpose:
Examples:
Choose ‘MENU’ in any circuit
Confirm
Choose the circuit selector at the top
right corner in the display
Confirm
Choose ‘Common controller settings’
Confirm
Circuit selector
90 | © Danfoss | 2017.09
VI.GU.L2.02
Operating Guide ECL Comfort 210/296/310, application A275/A375
