Type 2 is a three-up view with one large signal display capacity and behind it, partially visible, are two
small signal display capacities.
Screen type 3
Type 3 is a three-up view with one large and two small signal display capacities.
Screen type 4
Type 4 is a four-up view with four small signal display capacities.
For more screen type customization it is possible to configure the small signal displays by choosing from
three styles.
4. After choosing the gauge to modify, press select key, a screen called Modify What? will open.
Within this screen it is possible to modify the signal and advanced parameters. Additionally, for
screen type 3 and 4, the gauge type can also be modified.
User Manual
DM430E Series Display - Engine Information Center (EIC) Software
Setup to monitor signals
18 |
©
Danfoss | December 2018
AQ288937102741en-000102
