CAN settings menu
Fault Popup
Select on/off to enable/disable pop-up messages.
Conversion Method
Select 1, 2 or 3 to determine how to interpret non-
standard fault messages. Consult engine manufacturer
for correct setting.
Engine Address
Select engine address. Selection range is 0 to 253.
Engine Type
Select from a list of predetermined engine types.
Engine DMs Only
Only accepts fault codes or J1939 DM messages from the
engine.
Transmit TSC1
Enable to send the TSC1 (Torque Speed Control 1)
message.
JD Interlock
Transmit John Deere Interlock message required for
regeneration.
Display
Display Setting
Startup Screen
Select to enable/disable logo display at startup.
Buzzer Output
Select to enable/disable warning buzzer functionality.
Force Return to Gauges
After 5 minutes of inactivity returns to main Gauge.
Demo Mode
Select on/off to enable demonstration mode.
PIN Setup
To reduce the potential for errors, Screen Setup and System Setup menu options can only be accessed
after entering a PIN code.
The default code is 1-2-3-4. To change PIN code go to System Setup > PIN Setup > Change PIN Code.
PIN Setup
User Manual
DM430E Series Display - Engine Information Center (EIC) Software
Main Menu
©
Danfoss | December 2018
AQ288937102741en-000102 | 15
