![background image](http://html1.mh-extra.com/html/danfoss/cascade/cascade_operating-instructions-manual_3775279011.webp)
Cascade Controller Option
Installation and
Wiring Instructions
■
3. Remove VLT Cassette and Ribbon Cables
•
Lift control board cassette from bottom.
•
Disconnect two ribbon cables from VLT
control board.
•
Unhinge cassette at top to remove.
■
4. Remove LCP Keypad Cradle
•
Push tabs at side of LCP cradle to release clips.
•
Pull out to disengage and lift cradle free.
MG.60.I3.02 - VLT is a registered Danfoss trademark
11