User Guide
|
Alarm Logger, AK-SM 800AL
© Danfoss | ADAP-KOOL® | 2018.01
8 | RS8HR102
Cleared alarms
Alarms that are no longer in error condition will be shown in this
screen.
Screen saver
The AK-SM 800AL has a screen saver feature that protects the
screen from ‘image burn-in’ and offers a continuous live status
of current system alarms. During screen saver mode one of two
icons may be shown depending on alarm or system status;
Reports (Audit and Alarm list)
The alarm logger has the capability to save the list of alarms
(active or not) and the audit trail to a USB drive. Insert drive and
select “Save Report” to save to the drive.
Loading New system software
Danfoss has a policy of continuous improvement, from time to
time software updates will be available, please follow the instruc-
tions below to perform a system software update.
Ensure you are authorized at the ‘Supervisor’ level and insert a USB
Flash drive stick that contains the relevant software update. A pop
up window will indicate what software has been detected on the
USB Flash drive, select the appropriate software to load. During
the software update a progress bar will be shown and typically the
AK-SM 800AL will reset.
Note
: Software must be located on the root directory of the USB
Flash disk
Password Management
It is possible to manage passwords outside of the initial wizard
process by navigating to the ‘Users’ screen under the ‘Settings’
menu. Supervisor level permission is required to access the Set-
tings screens. If the Supervisor credentials for the AK-SM 800AL
have been forgotten or there is a change in supervisor personel, it
is possible to re-set this user back to factory default (Supervisor /
12345). This can be done locally in the store or remotley, but both
options are performed via the master AK-SM 800 unit.
Via the master AK-SM 800 unit, navigate to the Configuration/
Alarms/Alarm Routing page. From this screen it is possible to
re-set the alarm logger Supervisor password by pressing the as-
sociated line (see example below).
This action is recorded in the Audit trail of both the Master AK-SM
800 unit and the AK-SM 800AL.
The same principle is applied if accessing the system (master Unit)
from a remote location, except StoreView desktop or web browser
is used for connectivity.
Active / Ack Alarms Host network error
