User Guide
|
Alarm Logger, AK-SM 800 AL
RS8HR102 | 5
© Danfoss | ADAP-KOOL® | 2018.01
Wizard 3/3 Network
This screen is used to define important IP configuration details for
the AK-SM 800AL and the ‘master’ AK-SM 800 unit (address switch
0). Ensure all relevant settings are made in this screen, per site
specifications. Once complete press the finish button, where the
AK-SM 800AL will initiate a background scan and detection of host
units.
Note
: When pressing the finish button the AK-SM 800AL will
communicate over the host network to establish communica-
tions with all other detected AK-SM 800 units. A progress bar will
be shown, indicating the detection and communication process.
As part of this process the AK-SM 800AL will automatically set all
detected host AK-SM 800 units for alarm logger alarm action rout-
ing. Manual adjustment of these alarm actions is possible per site
specifications.
AK-SM 800 host units
For the AK-SM 800AL to function it is required that at least one
AK-SM 800 unit be present in the host system. As part of the auto-
mated configuration process in the last wizard step the AK-SM 800
unit(s) will be set as default ‘all on’ for alarm action routing. If ad-
ditional AK-SM 800 units are added after the wizard is run, please
manually configure your AK-SM 800 alarm routing screen per site
requirements.
Note
: From the main menu screen press the Network Status icon
for live host network status view
Maintaining a fully functional host network is critical in ensuring
all alarms are received by the alarm logger. If at any time a host
communications error is detected, the AK-SM800AL will alert the
user via a host network error icon.
