background image

Fig. 1

Fig. 3

B

R

9

2

8

A

0

7

Sensor

Temp.(˚C)

Value (ohm)

-10

0

10

20

30

64000

38000

23300

14800

9700

Temp.(˚F)

68

86

50

32

-14

Fig. 5

Fig. 2

1

,6

m

Fig.4

© 2009 Danfoss Inc.

Fig. 6

Fig. 7

Danfoss can accept no responsibility for possible errors in catalogues, brochures, other printed materials, and website information. Danfoss reserves the right to alter its products without
notice. This also applies to products already on order provided that such alteration can be made without subsequent changes being necessary in specifications already agreed upon. All
trademarks in this material are property of the respective companies.

Danfoss and the Danfoss logotype are registered trademarks of Danfoss A/S.  All rights reserved.

Danfoss Inc.
Toronto
Toll Free: 866-676-8062
Phone: 905-285-2050
Fax: 905-285-2055
www.LX.Danfoss.com

Danfoss

LX

BRINGING WARMTH TO LIFE

Summary of Contents for 088L5130

Page 1: ...ver 2 Connect cables according to the diagram fig 2 3 Mount the thermostat in the wall socket 4 Carefully replace the front cover by first positioning its upper edge and then clicking it into place Floor sensor The floor sensor must be connected to terminals marked sensor terminals C and D fig 6 Power module 088L5135 If loads of more than 15 A are required expansion is possible using power modules...

Page 2: ...moir fig 1 et retirez le couvercle avant 2 Raccordez les câbles selon le schéma fig 2 3 Montez le thermostat dans le boîtier mural 4 Remettez soigneusement le couvercle avant en insérant d abord sa bordure du haut puis en le poussant jusqu à ce qu il clique en place Sonde de température La sonde de sol doit être raccordée aux borniers marqués sensor sonde borniers C et D Figure 6 Module de puissan...

Page 3: ...mo L1 y L2 Cable de la carga Suministra alimentación eléctrica desde el ter mostato hasta el cable calefactor Este cable deberá conectarse solamente a los terminales de carga del termostato marcados con carga 15 A 1 Use un destornillador para liberar el pestillo fig 1 y retire la cubierta frontal 2 Conecte los cables de acuerdo con el diagra ma fig 2 3 Instale el termostato en el receptáculo de la...

Page 4: ... right to alter its products without notice This also applies to products already on order provided that such alteration can be made without subsequent changes being necessary in specifications already agreed upon All trademarks in this material are property of the respective companies Danfoss and the Danfoss logotype are registered trademarks of Danfoss A S All rights reserved Danfoss Inc Toronto...

Reviews: