Put the inner heat shrink tube for the end-termination (length: ¾” (20 mm); diameter: ½” (12
mm)) over the end of the trace heater
Leave an overlap of 3⁄8” (10 mm)
Beginning at the end of the cable, shrink the tube at a temperature of 275 °F / 135 °C
While still hot, compress the end of the tube using pliers and hold for 5 seconds
Now, put the outer heat shrink tube (length: 2 ¾” (70 mm); diameter: ¾” (19 mm)) over the
end of the trace heater
Make sure that it overlaps the bared part of the trace heater for ¾” (20 mm)
Beginning at the end of the cable, shrink the tube at a temperature of 275 °F / 135 °C
While still hot, press the end of the tube using pliers
26
27
Installation Instruction
14 | © Danfoss | 2017 11
VILWC122
Power connection kit - Cable to Junction Box with ½” NPT cable gland