Installation of the heat shrink tubes
Slide the bus wire heat shrink tubes (length: 4” (100 mm); diameter: ¼” (6 mm)) onto the bus
wires
WARNING:
Risk of burns Beware of hot surfaces when using the heat gun
Shrink the tubes at a temperature of 275 °F / 135 °C
Push the outer heat shrink tube (length: 1” (25 mm); diameter: ½” (12 mm)) over the end of the
trace heater
Shrink the tube at a temperature of 275 °F / 135 °C
While still hot, compress the tube between the bus wires using pliers and hold for 5 seconds
16
17
Installation Instruction
10 | © Danfoss | 2017 11
VILWC122
Power connection kit - Cable to Junction Box with ½” NPT cable gland