9
television program,
Press “REC” key on the Device or remote control, the “REC” LED on front panel of recorder turns red which shows that
recording has begun. Press the REC key repeatedly, and it can swich the recording time (ORT30min, ORT60min, and
ORT90min). Press the “■”key on the remote control or device to stop recording.
Watching while recording
When you’re watching one channel, you can also record the channel’s program at the same time. When your TV receives
a television signal ,enter the DTV interface and press the REC key to start recording,and a red circle will be display on the
upper right corner of the screen.
If you press the ENTER key, the screen will display the PR menu as follows. Press / key to select the channel you
want to watch. Then press the ENTER key to confirm. Thus you can watch the program on one channel while recording
another channel.
Note :
The contents you have recorded kept in the folder named with the time when you started recording.
b. AV IN mode
After the correct connection of the AV-in signal, power on the set-top box (or satellite TV receiver), TV and our recorder,
switch the TV signal to AV-in, if you only want to watch TV, do not turn off the recorder and keep the input signal of the TV
with the set-top box signal.
When you want to select the program which one like, please choose “the input video frequency” the option to enter the
television picture choose the television channel through the set-top box (Or satellite TV receiver).
Select “TV/AV IN” menu to access the TV menu, you can select the TV channel through the set-top box (or satellite TV
receiver). and press the REC key to start recording.
