11
How to use the USB HOST interface
A player with the ability to expand a large-capacity.The USB HOST port can read an external mobile hard disk, USB key,
digital cameras, card readers and other data storage devices.
Even without the installation of hard drive players, you can connect external storage devices through the USB HOST
interface. To directly play a variety of high-definition formats high-fidelity audio and video files stored in external storage
devices. To watch HD movies and digital photos in a better way, at the same time the digital audio signals to audio equipment
can also benefit from high-fidelity sound effects.
How to connect the USB interface to your PC
This HDD Recorder & Player is also a personal multimedia file storage device and can be used by connecting to a PC via
the USB interface.
1, Connect to the power supply.
While using the HDD recorder & player with your PC, power supply is still required.
2, Connect to your PC with a USB cable.
Connect the HDD Recorder & player to the PC with a USB cable to copy and transfer data.
Follow the instructions on the above picture to connect the device to PC.
Turn on the PC and enter the system. The PC detects the device automatically and then the device can be used as an
external USB storage device.
After data transfer has finished, please remove the USB storage device safely (click the USB device icon to stop the USB
device and then pull out the USB cable).
Notes:
1, Please don’t power off when connected to a PC for reading and writing.
2, If there is no USB detected after connected with USB cable, maybe the PC is operating another program, please
disconnect the USB cable and wait about 10 seconds then connect again.
The So World TV is also a personal multimedia files storage device and can be used by connected to the PC. You can
browse and copy files easily.
The following is the set-up for media file sharing on a PC (FOR ADVANCED USERS)
Operation of file sharing under Windows XP
Two conditions are necessary for a successful network connection.
- Folder sharing and security set-up
- Set the same gateway and subnet mark address.
1. Select the folder you wish to be shared, right click with the mouse and select the option ”Sharing and security”, left click
with the mouse.
2. Select “sharing” in the property option and select “share this folder on the network” and click “Apply” to confirming to exit.
