58
Fahrzeug-/Funktionsdecoder
ab Firmware-Version 1.11
58
Locomotive/Vehicle function decoder
from firmware version 3.12
8
System format DCC
8.1 Functions
Short address ................................................. 1-127
Long address .......................................... 0001-9999
Speed steps ........................................... 14, 28, 126
Speed steps (internal) ........................................ 127
Front light/rear light (dimmable) ..........................yes
Additional functions (dimmable) ............................ 2
Functions total ..................................................... 28
Operation with brake diodes ..............................yes
Operation with brake generators ........................yes
Consist mode .....................................................yes
Programming On The Main ................................yes
Locomotive number output ................................yes
Notice to address range:
DCC operation allows only address values from 1 to 127 for DCC-CV01, operating MM values from 1 to 255 are allowed.
Values from 128 on lead to restricting the decoder operation only to MM, i.e. DCC operation is no longer possible. DCC
“service mode“ is of course still possible.
Activating the long DCC address through CV29/Bit5 makes vice versa that the decoder can be operated by DCC just now.
MM operation is no longer possible then. MM programming is also disabled. Attention “lock out“ is possible.
Summary of Contents for FH16A
Page 105: ...105 Notes...
