56
Fahrzeug-/Funktionsdecoder
ab Firmware-Version 1.11
56
Locomotive/Vehicle function decoder
from firmware version 3.12
Activation of AFB (Automatic acceleration/deceleration control) and additional channel
*) The additional channel (ZK) has always the address: Locomotive a 1
Motor control variant
1 … 4
Not relevant to FH05B/FH16A/FH18A/FH22A
Setting by par056 ff. ...................................1
Hard ............................................................2
Soft .............................................................3
Very soft .....................................................4
Reading out the extended characteristic values is executed by the entry of the character sequence
00–111
and by pressing
the programming key. Writing of the extended characterictic values is executed by the entry of the character sequence
00=VAI
and by pressing the programming key.
Notice: Coreless motors should be operated with regulation variant 4 and pulse width 1.
No warranty for damages due to incorrect adjustments.
Caution!
Reading out and entering exctended characteristic values overwrite the default values of the decoder. In case you have
varied the extended characteristic values; the defaul characteristic value of the decoder must be entered again.
Function
with AFB
without AFB
Without additional channel
1
2
With ZK*) without function mapping
3
4
With ZK*) with function mapping
5
6
Without ZK*) with function mapping
7
–
Summary of Contents for FH16A
Page 105: ...105 Notes...
