D&H DHP160, Manual, Page: 6 / 36

6
5 Functions

Operation can be controlled either by conventional DC command stations or by digital central units
supporting the formats SelecTRIX 1 and 2 or NMRA-DCC

Automatically switchover from conventional DC to digital operation

In case of digital operation the last programmed system will be activated (no automatically switchover!)

SelecTRIX 1 31 speed steps, 100 addresses

SelecTRIX 2 127 speed steps, 10.000 addresses, 16 additional functions

DCC Short addresses (1-127), long addresses (0001-9999),
with 14, 28, 126 speed steps

Load compensation state of the art, that way an especially smooth regulation behavior

Various regulation variants for an optimal adaptation to the motor

127 internal speed steps

Block system operation by simple diodes (digital operating system)

Light and function output AUX1 can be dimmed and activated analogically

Function outputs AUX2, AUX3 and AUX4 (only if available) can activated analogically

Shunting gear

Electronic interchange ability of motor, lighting and track connections

All function outputs freely programmable

Thermal protection, insulation

Reset function for DCC and SX2

Decoder can be updated:
The update can be executed on the incorporated decoder when the loco is standing on the track (no
need to open the engine, the SW-Download can be downloaded from the Internet cost free)