D&H DHP160, Manual, Page: 24 / 36

24
List of supported parameters:
par
Name Definition Range Standard
001 Loco address unit position 0 – 99 1
002 Loco address hundred position 0 – 99 10
003 Loco address for SX1 If > 111 deactivated 0 – 255 112
004 Additional channel 1 for SX1 Functions F1 – F8 0 – 255 1
005 Additional channel 2 for SX1 Functions F9 – F16 0 – 255 0
006 Loco address output Activated = 1 0, 1 1
007 Effectiveness additional channels 0 = relative:
Additional 1 = par004
Additional 2 = par005
1 = absolute 0, 1 0
008 Consist address unit position Reserved
009 Consist address hundred position Reserved
011 Acceleration time The value corresponds to the time
in seconds from start to maximum
speed 0 – 255 3
012 Deceleration time See par011 0 – 255 3
013 Maximum speed See supplement 2 0 – 127 92
014 Starting voltage Reserved
016 Start delay speed step 1 Each 0,1 sec
Delay between receive of speed
step 1 and start for the SUSI
interface 0 – 250 0
018 Shunting gear speed See supplement 2 0 – 127 63